THE ORGONE DONOR - My Blog

THE ORGONE DONOR

The Ultimate ChemFAIL

4/7/2019

Happy Sunday, and a friendly reminder that chemtrails behave like this when you destroy the parasites' HAARP weapons like cell towers, smart meters, and wifi routers (see video).

Place Orgone devices around your town and surrounding area. Gift your home, cell towers, power plants and substations. Bury earth pipes, create obolixes and pyramids. Build chembusters to amp-up the Orgone energy bubble around your city, and watch this schidt seize, snap, and spiral apart. Why? Because their EMF weapons can't hold and manipulate this crap anymore.

Thank you to the parasite for laying it on thick this morning. You've provided another undeniable example for me to share!

*This message brought to you by the "Seriously, How Can Sheep Not Realize This Isn't Water Vapor, or Even Natural" Foundation.

Instructions for the Almighty Orgone Chembuster

4/1/2019

The following information is based on my own experience as an Orgone energy researcher and creator of Orgone and scalar energy devices. I've created three variations of the chembuster, the high-powered Orgone device based on the Cloudbuster, which was created by the late Wilhelm Reich. While each of these variations has shown fantastic results, I do have a favorite.

Additionally, if anything I've shared resonates with you and you'd like to support my work, please check out my online shop! All of my gifting adventures and Orgone research for the last few years has been self-funded, and 100 percent of every sale I've made has been used to create and gift more devices throughout the United States (and my happy little pockets of rain forest in Costa Rica).

***Disclaimer:
Everything I include in this document is for educational and entertainment purposes only. I am not a doctor, and the information I share regarding Orgone energy is not to be taken as any form of medical advice, nor is it meant to be used to treat or diagnose any medical condition, disease, ailment, or other heath-related issue known to exist in the entire universe. If you understand how and why Wilhelm Reich was destroyed by the FDA, this disclaimer will suffice. If you still have questions about this disclaimer, then Chembuster building is not for you. Please find a new hobby.

Additionally, I do not create or manufacture Orgonite devices for sale. I create orgone and scalar energy devices. The term Orgonite was recently trademarked by someone who I believe is a government shill. For details about that parasitic nonsense, visit my Orgone Energy page. For questions about Chembuster building, email me at mitch@TheOrgoneDonor.com. I'm always happy to help others combat this nonsense, especially those people taking action to help themselves!

In order below, you will find the outlines for the Don Croft CB, the Induction CB, and my personal new toy, which I didn't know what to call it other than Mitch's CB. Enjoy!

The Original Don Croft Chembuster

What is it?
The Don Croft Chembuster is the original sky-cleaning tool for Orgone workers. It is essentially a large bucket filled with an orgone device recipe of metal shavings and resin, typically aluminum shavings so it’s light-weight (it can also include other metals like brass and iron). Six copper pipes are embedded into the device standing up, fastened together with a thin piece of wood with six 1-inch holes drilled through it.

Six quartz points are embedded inside the copper pipes, meaning that one quartz point is placed in the bottom of each copper pipe, and each pipe is then sealed with a copper cap before placing the capped end of each pipe inside the resin/metal mix within the bucket. This ensures that the resin/metal mix does not actually come into contact with the quartz crystals inside each copper pipe.

The original instructions around the Orgone interwebs also include small rings of garden hose to fit over the quartz crystals, with the claim this gives enough pressure to squeeze the quartz for the piezoelectric effect since it is not being squeezed by the compression of resin after it catalyzes and hardens. I only did this step while constructing the first chembuster I ever made; and while the CB worked wonders, I made follow-up models where I left the caps off the pipe and kept the quartz points exposed, simply placing them in the bottom of the pipes. Then the resin filled the pipes and surrounded each quartz point in each pipe, ultimately exerting some light pressure on the quartz inside the pipes. I know there are some Orgone workers who would have a hissy-fit knowing I did this. I don't care. Our meteorologists in Chicago spent months running around like chickens with their heads cut off because the weather wouldn't do what their geoengineering handlers at Raytheon and Weather Central wanted, and their scripts were made useless. Side note: If you want a good laugh on this topic, check out my YouTube channel and watch any of my Fear Porn Forecast videos. My point is, this construction method has worked for me well enough to continue building them that way; however, if you're making this version for this first time, I recommend just following Don Croft's original instructions and avoiding modifications.

This is also most expensive variation of chembusters I’ve created, due to the copper pipes, couplers, and end caps, but it is a tried-and-true device used for years by Orgone workers around the world with success at restoring the natural weather cycle. If in doubt, make this one. It’s fantastic.

Supplies Needed:

Two gallons of resin (If on a budget, use something simple like Bondo Fiberglass Resin from the hardware store)
One 2-gallon plastic white bucket (also from the hardware store).
Six 1-inch copper pipes with dimensions of 1 inch diameter by 72 inches (so basically, each pipe is six feet long) - I use Type M or L (mostly M due to cost)
Six double-terminated quartz crystals (double terminated means they're pointed on both ends), and they must be able to fit inside each of the copper pipes.
Glue or caulking agent (for fastening the quartz points inside each pipe and gluing each cap shut)
Garden hose, cut into six pieces, long enough to cover half of each quartz point
One round CB disc, which is the wooden or plastic disc with six holes that will be used to support the pipes during construction. The disc will also continue adding support after the device is complete. Each hole should be the same diameter as the outer diameter of each copper pipe
Copper pipe caps, 1 inch diameter (found at hardware stores) These will be glued shut on the end of each pipe
Six copper couplers, for 1-inch copper pipes (these are the small connectors for pipes)
Crushed quartz, selenite, Shungite, tourmaline, and/or other crystals (all of these are optional)
Shungite Powder (three to six ounces by volume, also this is optional)

Tip for Building:
Purchase pipes in 10-foot increments. Also purchase a $5 pipe cutter. Cut one of the pipes into ten pieces, each the length of 1-foot. Also, purchase three more 10-foot pipes and cut them into 5-feet increments, so you have six pipes at 5-feet each, and then use six of the ten 1-foot pipes as well. You can use the extra four 1-foot pipes as earth pipes later on. This is how you make the CB base with only 1-foot of pipe, which makes it mobile, then attach the 5-foot pipe to the base.

Wooden Discs
Some people have asked me where I get my discs. I purchased one back in the day from Orgonise Africa and then continued using it as a template with my uncle's drill press. I've also seen printable templates online. This seems to be the piece that most people can't create themselves due to not owning the tools (jigsaw for carving the circular shape, drill press for punching out the holes). Don't be discouraged by it. Use your best judgment to obtain, purchase, or make these discs. In my case, I now create my own using the same disc I bought from OA. The disc doesn't have to be perfectly round, or even round at all (if you don't have a proper saw). Just make sure the holes are the same diameter as the pipes you're using. Copper is heavy, so you need at least one disc to help support this device in the construction process. Croft's original instructions called for two. One is essentially buried within the bucket of resin. I manage to pull the disc up after the resin has cured so my pipes are straight and then I only need one disc at the top with the extending pipes that are connected later.

Shungite FYI: I use Shungite powder (optional). Shungite powder is a strong antioxidant that purifies everything it touches. Resin is activated by oxygen and heat. Because of this, Shungite will actually slow the curing process significantly. It takes a little practice, but whenever I add Shungite powder to resin I add some extra catalyst/hardener in order for the resin to properly cure. My process for this is:

Add the amount of catalyst per the instructions. Mix as required
Add Shungite powder, stir
Then add an additional 50-75 percent of the original amount of catalyst indicated in the resin instructions.

Example: One of my resins calls for 10-drops of catalyst per 1-ounce of resin. So one ounce of resin will have 10 drops of catalyst, then I mix my Shungite powder, then I add an additional five to seven drops of catalyst after adding the Shungite.

Construction:

The method is fairly simple. Slide the hose over each quartz point so it's tightly fit.
Using some silicone glue, add a dab to the copper caps, and then stick the terminated crystals on each of the caps. You want to make sure the quartz crystal sticks to the cap, and that the cap will fit on the end of each 1-foot pipe that you previously cut out.
Slide each 1-foor pipe with the hose-covered quartz into the wooden disc to make sure all six pipes are stable and standing as straight as possible.
Begin preparing your a quart of resin (I do this in 1-quart increments).
Depending on how large your metal shavings are, some people find it easier to fill the bucket with shavings and then pour the prepared resin over the top so it fills in the gaps and sinks to the bottom. If the shavings are too small, then you can mix them in a container with the resin first so that it forms a thick consistency (I call this the milkshake method). It will be very thick like a milkshake, but should still be pourable, and then you can pour the entire mixture into the bucket.
Fill the bucket at least one to two inches of prepared resin/metal mix (and powders and shungite if using them) before doing anything further with the pipes and wooden disc.
Once the first layer is heating and hardening inside the bucket, prepare your 1-foot copper pipes by setting them inside the bucket so the entire pipe structure is sitting on top the first layer of cured resin. The wooden disc should remain at the top, just outside the bucket. It is only meant to keep the pipes situated and aligned until later. Some people use several discs and bury one within the bucket on the bottom. I don't find this necessary in my experience but others do. Use your best judgment
Prepare another quart of resin and metals and pour this into the bucket so that it begins to cover the pipes. Let this layer begin to harden
Continue repeating the resin/metal mixture in quart increments for each layer. Make sure to wait until the previous layer begins hardening and getting warm
Make sure to stop filling the bucket with your resin/metal mixture at least onc inch before you reach the top of the bucket
Once the chembusters bucket base has cooled (this takes about 3-4 hours), you can slide the wooden disc off of the pipes
Use the copper couplers to connect a 5-foot pipe to each of the pipes sticking out of the chembusters bucket base
Reattach the wooden disc to each 5-foot copper pipe so the disc is at the top of the entire device. This will hold the pipes in place and give extra structure
Wait 2-3 days before expecting dramatic results. You’ll most likely experience windy conditions, a possible black helicopter experience (seriously, look it up, also don't worry about it... it's just psychological nonsense from loser parasites). You should also see noticeable geoengineering activity breaking down; but the full effects may take a few days as the new CB calibrates to the environment

As you become more familiar with chembusters, you can also begin to add more pipes and disc supporters to make the device taller. In my experience, longer copper pipes showed enhanced results.

The Induction Chembuster

What is it?
The Induction CB is a powerful device for those who want to create a significant impact against the geoengineering agenda but are restricted due to their budget. There are many Orgone workers around the world who claim this device is just as powerful as the Don Croft CB, and I believe many of the claims myself. I have made one of these and the results were spectacular. I’ve researched as much as I could about the Induction CB, and the only available sources I can find mention it was developed by Virgil Grenier. I can’t verify with certainty if this is true.

The cost to produce my Induction CB was nearly half of the cost of my previous Croft CBs. The three main differences between these devices are that 1) the Induction CB utilizes aluminum tubes instead of copper pipes; 2) there are no terminated crystals inside the pipes. Instead, the pipes are left empty and embedded into the bucket of the resin/metal mixture, and a large amount of crystals are added to the overall mixture in no particular way. The crystal mixture can be any crushed or terminated quartz crystals that you want to use; and 3) the Induction CB can be modified to a smaller size than the regular Croft CB. Some people make Induction CBs that are much smaller in the base, using a smaller bucket/mold. The Induction CB is essentially a bucket of towerbuster with aluminum pipes sticking out, kind of like antenna for the giant towerbuster that it is.

The aluminum pipes are also insulated from the resin/metal base by wrapping them in an insulating tape or other type of wrapping, so that the mixture does not have direct contact with any of the aluminum pipes that have been embedded inside the mixture. The supplies needed are based on my own creation, so I used the same 2-gallon bucket as my base mold.

Supplies Needed:

Two gallons of resin
One 2-gallon plastic white bucket
Six 1-inch diameter aluminum tubes (these usually come in 8-foot tubes)
One round CB disc, the wooden or plastic disc with six holes that will be used to support the pipes during construction and continue adding support after the device is complete. Each hole should be the same diameter as the outer diameter of each copper tube.
Eight ounces (or more) of Quartz and selenite, by weight (pieces, points, small chunks, powders, crushed, etc… doesn’t matter)
Three to six ounces of Shungite powder, by volume (this is optional, but I believe shungite enhances this particular model)

Tips for Building:
If you have access to the wooden/plastic discs that hold CB pipes in place, you will notice that 1-inch aluminum tubes are not the exact same diameter as 1-inch copper pipes. However, 1-inch aluminum tubes should fit inside Type M 1-inch copper pipes. I use a pipe cutter and cut a small ring of copper from my Type M pipes used for other CBs and earth pipes, and then slide it over the aluminum pipe and fasten with tape. The aluminum fits through the copper, and the copper fits snug into the wooden disc, so the disc will then support each of the aluminum tubes and keep them in place during construction.

If you have the correct drill bits you can also just cut discs that fit directly with your aluminum tubes.

Purchase aluminum tubes in 8-foot increments. Also purchase a $5 pipe cutter. Cut each pipe into 6-foot length. You can use the remaining 2-foot increments of aluminum tube for earth pipes. Or if you prefer, you can leave the tubes in 8-foot lengths and build a taller CB. Please note, because there are no connectors (couplers) with this device allowing you to take it apart, this device is less mobile due to the final shape when it’s standing up. It is essentially a 6-8 foot device and the tubes do not disconnect from the base like in the Croft CB.

Shungite FYI: I use Shungite powder (optional).
Shungite powder is a strong antioxidant that purifies everything it touches. Resin is activated by oxygen and heat. Because of this, Shungite will actually slow the curing process significantly. It takes a little practice, but whenever I add Shungite powder to resin I add some extra catalyst/hardener in order for the resin to properly cure. My process for this is:

Add the amount of catalyst per the instructions. Mix as required
Add Shungite powder, stir
Then add an additional 50-75 percent of the original amount of catalyst indicated in the resin instructions.

Construction:

Prepare your aluminum tubes by wrapping one end of each aluminum tube with an insulating tape, at least as long as the depth of the resin/metal mixture that will fill the bucket. This will prevent any of the mixture from coming in to contact with the aluminum tubes.
In quart increments, create your resin/metal shavings mixture, and make a layer in the bottom of the bucket, about 1-2 inches deep. Then let it begin to cure
Place the tubes in formation with the wooden disc support so they are in place and standing up. Make sure any aluminum tubing inside the bucket is covered with the insulting tape
Continue mixing your base of resin and metals, and drop the crystals into the mix so they are submerged. You don’t need to add everything at once. Add some crystals during each of your layer pouring. While this device isn't really "layers," it will be poured in layers to avoid mixing too much resin at one time. Essentially this will become one block of an Orgone device within the bucket.
Fill the bucket about 1-inch from the top. Make sure all of your remaining crystals are inside the bucket mixture. The crystals should be distributed throughout the entire resin/metal mixture. Let the entire device cure for several hours before moving.
Wait a few days for the fun to start happening (Although it will happen much sooner than that)!

Mitch’s Chembuster

What is it?
This is my favorite CB to make because in my experience it is the most powerful CB I’ve created. The construction is similar to the Induction CB, however, the aluminum tubes are not insulated from the resin/metal/crystal mixture, and the device is prepared in layers instead of one giant "base" of the same material. The design is based on a smaller-scale device I created in January, 2019 that I named “The ORgun.” Please see my blog post at TheOrgoneDonor.com/blog to learn more about my ORgun device.

My CB is constructed in several layers with crystals scattered throughout the base. I also amplify the energy by utilizing 18 quarts points wrapped in copper coils which are placed in groups of six per every other layer. This device has six layers, so three of them will each have six of the wrapped quartz, facing outward from the center of the base. Other crystals like selenite can be added to any of the layers. I add selenite to all of the layers. In addition to the wrapped points and the other crystals used in the resin and metal mixture, I embed a 15 Hz Succor Punch device in the top of the CB base once all of the other layers have been prepared. The SP uses a 9V battery to pulse the 15 Hz frequency. Quartz points are not necessary within the aluminum tubes.

Supplies Needed:

Two gallons of resin
One 2-gallon plastic white bucket (from any hardware store).
Six 1-inch diameter aluminum tubes of at least six-feet in length (these usually come in 8-foot length)
16 ounces of metal powder (by volume). This can be steel, copper, brass, iron oxide, or aluminum
Eight ounces of iron shavings (this can be substituted with additional aluminum shavings if you can’t find iron). The iron will add extra weight in the bottom layer and allow the CB to stand up without additional support
One round CB disc. This is the wooden or plastic disc with six holes that will be used to support the pipes during construction and continue adding support after the device is complete. Each hole should be the same diameter as the outer diameter of each copper pipe.
18 Quartz with points (terminated) approximately 2-3 inches, each wrapped in a copper coil (I use 18-20 gauge copper wire to wrap my quartz points)
One Succor Punch 15 Hz Pulsing Device -- I purchase my SPs from CTBusters.com (make sure to order one with a lead wire between the quartz and the battery, not the one with the quartz glued to the box. Those types are better for carrying as a cloaking device when gifting orgone devices).
Eight ounces of random Quartz and selenite (again, this can be pieces, points, small chunks, powders, crushed, etc… doesn’t matter.
Six magnetic hematite spheres (optional)
Three to six ounces of Shungite powder (by volume, and optional, but I recommend adding this)

Tip for Building:
This particular device is prepared in layers. The first layer includes resin, metal powders, iron shavings, Shungite powder, and some crushed quartz and selenite, so it’s basically a large towerbuster. The following layers alternate between one layer of aluminum shavings and resin with a little bit of crushed crystals added, followed by a thin layer of resin with six wrapped quartz points. The layers with the wrapped quartz only need to be about 0.25 to 0.5 inches thick, just enough to cover the wrapped quartz points. Then layer another resin/aluminum/crushed crystal layer, then another thin layer of resin and the wrapped quartz. In the end, there should be three layers with six wrapped quartz per layer, and then three layers of resin/metals/crushed crystals

When ready insert the succor punch device into the top of the CB base, use strong tape and stick the SP box to the side of the bucket. Do not let the battery box fall into the resin mixture.

Please Note: My latest device includes an additional layer on top with more wrapped quartz for a total of 24. The recipe for this only uses 18 quartz points. The extra quartz in my device was included for aesthetics because the top is clear. It is completely optional. I also used copper shavings throughout the process, including the top, but this is not necessary. Use the metal shavings you can get. Copper shavings can be very expensive.

Shungite FYI: I use Shungite powder (optional). See my disclaimer about making sure to use enough extra catalyst when Shungite is added to the mixture with resin (I posted this in the previous two models).

Construction:

Prepare your aluminum tubes so they are secured with the wooden/plastic disc. This will make it easier to set when you finish the first layer
Prepare 32 ounces of resin and mix with the Shungite powder, metal powders, and then slowly add the iron shavings (you might not use all of the iron depending how thick the mixture becomes. Again, you can use aluminum in this layer if you don’t have iron. The iron gives the base a sturdier weight for support. The entire mixture should be a thick milkshake consistency
Once the first layer begins to heat up and/or begins to harden, place the aluminum tubes inside the device so they are level and stand up freely within the bucket.
Prepare 32 ounces of resin (approximately) and mix with aluminum shavings and some crushed crystals. It should be a thick milkshake consistency. Pour into the base so it begins to cover the aluminum tubes and let it begin to harden or heat up
Mix 16 ounces of resin and pour over the previous layer. Then place six of the wrapped quartz points inside the base, each facing outward. One quartz point should fit within the gap between each of the aluminum tubes. At this point you can add other crystals as well.
Repeat this layer process so that you have the following setup from bottom to top:

Resin/Shungite/iron base (then wait until it begins to harden and setup the aluminum tubes)
Resin/aluminum, crushed crystals
Resin/wrapped quartz
Resin/aluminum/crushed crystals
Resin/wrapped quartz (this is where I also added the optional magnetic hematite spheres
Resin/aluminum/crushed crystals
The top layer that comes next will be the layer with the embedded succor punch in the middle of the device, facing upward. There is no particular way to do this. Just prepare your resin and then wait a few minutes so that it thickens before pouring. Then pour, and insert the succor punch. You will have to hold the SP in place, so if you have a space heater or small heat gun, it might be useful to use it in order to speed up the process for the top layer (although not required). Resin will generally solidify before getting “hot” so just be patient and the SP should stay in place shortly after you embed it. Make sure to embed the SP crystal at least half way into the layer, and let the wires remain fairly loose as they stick out of the resin.

***Make sure to use tape (duct or stronger) to hold the battery pack of the SP in place while the resin is curing and begins holding the SP crystal in place. When I made this top layer, I prepared my resin and then waited three to five minutes to pour it into the bucket. This way it already began to thicken so I didn’t need to hold the SP crystal in place for very long before the resin hardened enough to hold it up by itself.

Allow the full device to cure/harden for a few hours before moving it, then you’re good to go kick some parasite ass. Slap a 9 volt battery into the SP battery pack and enjoy!

Also, this device is approximately six feet tall. For my own device, I cut six pieces of 1-inch Type-M copper pipe, approximately six inches in length. Type-M 1-inch copper pipe is just slightly larger in diameter than 1-inch aluminum tubing. I used the copper pieces as connectors and added an additional 6-foot aluminum tube to each of the existing tubs on the device, making my CB just shy of 13 feet tall. In my experience, this is not necessary for the piece to function, but it makes for a fun time aiming at chemtrails and causing the parasites to work overtime as their chemtrail sprays disintegrate in an instant! If you're building your first CB, I don't recommend making too many modifications. Keep it simple!

For more info on this CB please email me at mitch@TheOrgoneDonor.com.

The Making of a New Chembuster

3/23/2019

About two months ago, I constructed a small orgone device using aluminum rods and a 15hz Succor Punch (quartz crystal device wrapped in a mobius coil). It basically looked like a mini chembuster. I called in an OrGun, as a play on the word Orgone, but mostly because it acted as a super-powered blaster that caused chemtrails over Sedona to spiral and disintegrate in an instant. To read that blog post from January 18 click here!

To amp this power, I finally built a new chembuster modeled after this smaller device. With the spring solstice this week, as well as the full moon and super moon, as well as incoming solar flares, I knew chemtrail spraying would be off the charts, and sure enough it was. Why? Because geoengineering is connected to consciousness suppression. Because parasites are trying to push a global warming and climate change agenda to try and enslave humanity. Because solar flares carry consciousness-advancing frequencies that make humans so freaking powerful, and we're waking up more quickly each day. Flares also destory the AI agenda in my opinon.

So in prep for this week's events I made this new chembuster. I also documented the reactions in the sky and weather as each layer of this new chembuster was curing and the resin/crystal/metal matrix began working, as well as after the device was complete, and the reactions became more noticeable.

Side note: This is the seventh, and most powerful, chembuster I have created, partially due to the layering effect, the incredible number of crystals, copper wrappings, and metal shavings and powders used, and the special 15hz Orgone Succor Punch device that I embedded in the design. It's fantastic, and the parasites can't keep up in their spraying anymore!

In a nutshell, white haze breaks down, clouds form, and it gets windy as schidt. Then the magic really starts as the sky splits open, exposing the parasites who were hiding above their lifeless white haze, and you can watch them scramble around the sky, trying to fill the gaps with chemtrail spray as quickly as possible, all while the frequency lines become more prominant as they try to crank up their frequency weapons. It's a sight I never tire from watching!

Check out the following videos Part 01 through Part 06 and watch the reactions that occur when you create a large-scale Orgone chembuster.

For those unaware, the chembuster is based on the Cloudbuster from Wilhelm Reich, a device he used to agitate the environment and move Orgone energy fields to bust clouds and restore rain to the environment, particularly in Arizona.

I highly recommend Riech's book Contact with Space to learn more about his Cloudbuster technology, as well as how Reich concluded that deserts are not natural (they are influenced by terraforming activities and manipulation of weather and the environment). Some simple searches using the Freedom of Information Act will find a plethora of military weapons and operations used to desertify the weather and destroy the planet, as well as manipulate brainwaves and consciousness using frequency. For the deeper-level "rabbithole" stuff you will need to do a lot of digging beyond the censors of Google though. It goes much much deeper than just the military and government.

I also recommend learning about Don Croft, the man credited with creating the chembuster. I have made CBs following Croft's original instructions, however, this particular CB does not insulate the terminated quartz inside the pipes. The important part based on experience is using quality quartz, wrapped in coils, throughout the base. This CB has 44 separate quartz points, and the 45th is the Succor Punch at the top.

For those looking to get a chembuster, it is important to note that all cell towers and other HAARP weapons need to be neutralized with smaller orgone devices like towerbusters and earth pipes before using a CB to restore a local environment. A CB will definitely help clean the atmosphere of chemtrails, DOR, and other geoengineering activities, but it's like placing band-aids on a laceration that requires stitches. You need to neutralize the problem at the source first and stop the bleeding; in this case the weapons used to create the problem in the first place. Once you gift Orgone devices to enough HAARP weapons (cell towers, smart meters, etc.), the CB will kick some major parasitic ass.

Side note, on Tuesday night after making this, around 3 a.m. (technically Wednesday morning), I woke to a horrifically windy rainstorm that came out of nowhere. I had to run outside and dismantle this CB by removing the six-foot extension pipes.

A typcially CB is six feet tall, but I like to go big or go home, so I made copper connectors and attached a second set of aluminum pipes to each initial pipe, making this new CB approximately 13 feet tall. Once dismantled, the wind died down and I went back to sleep, a bit shaken (to be honest) by the power of this beast of an Orgone device.

If you would like to learn more about Orgone chembusters, or would be interested in purchasing one for your city/town or local area, email me at mitch@theorgonedonor.com. Some people make them very ornate and very costly. I am more interested in ending geoengineering on planet Earth, so I can do my best to keep the costs low if you're looking to purchase one.

The CB is the ultimate tool for not only ending geoengineering, but it's also the best and easiest way to prove to people this stuff is real. A few simple motions of a CB during heavy spray days, solar flare days, or anytime the forecast calls for a chance of rain, will result in some pretty cool reactions in the atmosphere that are undeniable to even the sheepest of sheeple!

Just please be careful with chembusters. With great power comes great parasite ass-kicking responsibility!

Now the Parasite Aren't Even Trying to Hide Their Agenda

3/17/2019

I've been waiting to share this until I was fully confident, and now I am certain without any doubt...

Since November, we've gifted so many Orgone devices in Arizona it's just downright sick (sick I tell you)!! We've had rain and snow galore, and everyday is blessed with blue skies and puffy cauliflower shaped clouds. Chemtrails are now chemfails. But something changed about 1-2 months ago.

Raytheon and Weather Central, who control anything and everything that you get your weather forecasts from (and who own all the geoengineering patents), are blatantly lying about rain predictions when it's going to happen. This right here, these clips, were a zero percent chance, no mention of rain and no mention of any clouds either. Our forecasts were clear skies though. Why? Because they know, and I know, that a rain prediction of even 10 percent means it's in our collective mindset, and if you're not a sheep, then you probably know that humans can control the weather with collective thoughts (seriously, already proven by the CIA, the same as they proved you could find John McLame in a POW camp with small child remote viewers (again, seriously look it up).

Point is, something is different now. They know this. I know this. And I know they know that I know they know this (*waves to them). This video here is what no mention of rain looks like. It's poured for 45 freaking minutes. Hailed for 10. Thunder and lightning off and on. Now we have the sunset and rainbows, and the vibe is high.

This has happened so many times in the last month. Dry and no mention of rain, yet it pours with a sky filled with rain clouds. The geoengineering agenda is dying. Pay attention to the patterns.

Also, I'm fairly confident they were trying to move this water northeast and hold it until they could drop it on the Midwest, where they're already dealing with flooding right now. The Agenda to incinerate Californistan with fires no longer works, so they're trying the opposite; diverting as much of the Orgone induced rain to the heartland of America's food source (other than CA).

Cue that stupid "the more you know" star wipe from NBC. I'm out. (Drops mic).

Introducing The Green New Deal Breaker!

3/16/2019

Introducing The Green New Deal Breaker: The multi-layer and multi-function Orgone device that acts as a beacon for EMF protection, raises awareness to geoengineering, and aims to destroy one of the most ridiculous agendas plaguing humanity and planet Earth; The Green New Deal. (FYI, the Green New Deal is just Agenda 21 with extra steps).

WHAT DOES IT DO?
The Green New Deal Breaker is perfect for those who want a top-notch Orgone energy device for protecting the home from HAARP frequency weapons like cell phones, smart meters, and wifi routers; yet it’s so much more! The GND Breaker encapsulates the pure insanity of the Green New Deal, an agenda led by parasites, aimed at nothing more than destroying a global economy, wiping out any remaining middle class, and making parasitic globalist politicians and elites ungodly wealthy in their pursuit to control humanity and the collective consciousness. The secret to its success: The invisible and nonexistent boogeyman known as global warming…

I mean climate change…

I mean global cooling…

Oh never mind what it’s called. A female with zero experience in politics, economics, finance, geopolitical affairs, meteorology, or common sense said we have to pass it because it was 80 degrees that one time in Miami in June.

The truth is, there are forces that have geoengineered our planet for a very long time, utilizing aerosols known as chemtrails, working in tandem with frequency weapons known as HAARP. When you place Orgone devices around EMF devices, particularly cell towers, smart meters, 5G towers, and power plants, the agenda falls apart. Manufactured drought goes bye bye. Clear blue skies return. Animals, plants, and other living creatures begin to thrive. Not to mention the earth is naturally cooling and healing itself in conjunction with the Grand Solar Minimum. More and more people are using Orgone energy devices around the planet, which is why the global warming agenda is breaking down; so much so, that now the parasites have deployed brainwashed children into doing their dirty work, trying to convince the masses that we must do this in order to “save the children!” (Telephone rings) Excuse me. 1944 called and Adolf would like his tactics back.
The Green New Deal agenda aims to destroy small businesses by making it impossible to meet energy standards that have nothing to do with weather or climate. It aims to tax people for everyday decisions that have nothing to do with weather or climate. It aims to reduce freedom and mobility of humanity by restricting freedoms of existence that have nothing to do with weather or climate. Are you sensing a pattern here?

Much of the collective consciousness has been convinced that humanity is responsible for anything having to do with weather or climate. It is simply not true, and it never was true in the first place. Geoengineering and manufactured weather activities are responsible, which is why the same parasites who caused the problem are now pushing the manufactured solution to it.

Humans are taking back their power, physically, mentally, and (most importantly) spiritually. Geoengineering activities and the mind control from frequency weapons are failing on a global level. The GMOs don’t work anymore. The vaccines don’t work anymore. The media doesn’t work anymore. Much of humanity is awake. Geoengineering and frequency are the only remaining weapons that the powers-that-were still have, which is why lunacy like the Green New Deal exists. Destroy it once and for all, with a little help from Orgone energy!

WHAT’S IT MADE FROM?
The GND Breaker includes three layers: The first layer contains three terminated quartz points wrapped in copper coils, selenite, black tourmaline, copper shavings, and a copper coil (centered); the second layer includes aluminum shavings, crushed quartz, and mica pigment powders; and the third layer includes a double layer of copper and aluminum shavings, followed by Shungite, iron shavings, and atomized steel powder. It is essentially a super thick Shungite EMF protection device, layered with the standard Orgone energy device formula, for a powerful and effective beacon of total Orgone protection.

The GND Breaker is available in several colors inspired by the agenda it tries to hide, including: Gub’mint Green, Agenda Apple, Carbon Tax Turquoise, Free Cheese Cheddar, Yellow American, Cheetah Snack Food, Cow Farts, and for my own enjoyment, a limited edition that of 24k Gold.
They're also on sale from now until Earth Day!

Visit TheOrgoneDonor.com/shop to learn more!!!

Chemtrails are Useless Inside Orgone Energy Fields

2/27/2019

Today was a heavy spray day (no shocker there), but this particular stream gave me some material worth sharing. Check out what happens when chemfails don’t work in an Orgone energy bubble. The streams seize and look like strings of rope lights, with some kind of woven material trying to connect and do something between those two streams. I believe the intent is that the two streams should plume outward and the woven mess should stretch out like a canopy or net, giving the parasites a lovely DOR blanket to zap to high hell. But alas, we (and countless others) have neutralized their frequency weapons with orgonite gifting.

Because This is Normal...

2/25/2019

You would think more sheep would realize if this was water vapor then it would be a daily occurrence, which it’s not, thankfully. Been pretty clear over Sedona, with tons of snow and rain) until this morning. Why now? Lots of possible reasons, including solar flares, winds, and tomorrow being a half moon cycle.

Something I find interesting is if you look up astrologer Robert Phoenix, his year-long predictions for cosmic energy (at least so far) have aligned perfectly with heavy spray days. A bit much to just be coincidence in my opinion. We know they increase during new and full moons, solar and lunar eclipses, and every time before rumored solar flares reach our atmosphere, like today.

I’ve been doing what I can this morning and despite their efforts and forecast calling for total white out, the sun is bursting through, and you can see the obvious battle between incoming frequencies, their DOR cover, and Orgone energy, hence the massive halo.

(at Sedona, Arizona)

https://www.instagram.com/p/BuUPuK9Hqyn/?utm_source=ig_tumblr_share&igshid=ss7liah8xtsb

Let the Mental Gymnastics Begin

2/22/2019

I am curious to know the opinions from those who keep saying “trust the plan” and what they have to say about this tweet. Should I start stretching now so I’m warmed up for all of the mental gymnastics?

(at Sedona, Arizona)

https://www.instagram.com/p/BuMIKMNg4hn/?utm_source=ig_tumblr_share&igshid=enarsosdct68

Yeah, I’d Call That an Orgone Success

2/22/2019

Well, most of our pines now look like weeping willows, and it’s still snowing… Flagstaff appears to already be at 40 inches and counting. Sedona is mixed. I’ve heard 11, 15, and 18 inches depending on which side of which mountain you live on. Friendly reminder, it doesn’t snow much in Sedona. In fact, the majority of people here don’t have snow shovels because it wasn’t really necessary. That is, until some frequency weapons were knocked the f**k out with Orgone devices.

At this point we’ve gifted Arizona with several thousand towerbusters and enough earth pipes that we’ve lost count, not to mention several chembusters in the area. Considering the record breaking weather, I hope more people will finally realize drought is not natural, and orgone energy will end geoengineered drought.

(at Sedona, Arizona)

https://www.instagram.com/p/BuMz2HHgbMP/?utm_source=ig_tumblr_share&igshid=2psdcak5tuxv

And So It Begins

2/21/2019

Supposedly we’re getting 24-48 inches here in Sedona and every surrounding city. Yesterday was a massive spray day for the parasites, which we know happens whenever rain or snow are coming. Even with the sound-muffling ability of the snow I can faintly hear the sound of parasites flying above. I wonder how much snow would actually fall if they stopped trying to suppress it. I have a feeling we’d be herding the animals two by two onto the giant snowmobile.

So reminder, global warming is a hoax, the earth is cooling and healing on its own, there is no scarcity of water (or any resources for that matter), drought is manufactured, the green new deal is a batch of NWO bullschidt, and this snow is solar-charged restructured and crystallized water, and it’s going to saturate the land, further improving the planet.

(at Sedona, Arizona)

https://www.instagram.com/p/BuJiaJrHb0P/?utm_source=ig_tumblr_share&igshid=1sm2kx2kcj47e

More Proof Orgone Energy Stops Geoengineering

2/20/2019

We’ve only been in Sedona since November and here’s what’s happening since we started gifting endless numbers of Orgone devices to end geoengineering and manufactured drought. First off, the parasites still spray, but their trails don’t do schidt. It has been rain and snow galore, cooler temps as their global warming hoax continues to die, and last Thursday-Friday it rained for nearly 48 hours straight. Oak Creek is gushing, waterfalls are flourishing, and the news can’t avoid all of the very obvious precipitation that is restoring balance to Arizona.

The weather here is now either sunny with blue skies, or cloudy with healthy water. We also have 24-48 inches of snow coming on Thursday, although our temps will cause much of it to melt. This spring and summer are going to be more lush than ever. And we’ve only gotten started with so much more to gift this year.

Please pay attention to what Orgone can do to end geoengineering. Global warming is a hoax. The green new deal is simply Agenda 21 with extra steps (which is why only ignorant sheeple support it), and the parasites are not happy as they continue to be purged from our healing planet. If you want to make change, get gifting. Gift towers, meters, any place with dense populations, power plants, airports, and anywhere else they try to lower the collective energy via bastardized frequencies.

And to all the children who get to stay home Thursday or Friday, you’re welcome. (Drops mic).

The Tucson Gem Show

2/10/2019

So thankful to experience my first Tucson Gem Show. Thank you @infiniteusrocks for letting us play together the last few days!! And thank you universe for the substantial hookups. This entire experience will allow me to make and gift towerbusters and earth pipes until the end of time!!

(at Tucson, Arizona)

https://www.instagram.com/p/BtsCcNonZSZ/?utm_source=ig_tumblr_share&igshid=n0y0gg13xmpl

A New Orgone Toy

1/18/2019

I rarely come out from behind the camera. Today I made an exception. Pardon the need for shaving. I've been busy cleaning the freaking sky all week. What have you been doing?

This is my new device, and I will explain it next week after the lunar eclipse. For now, I'm calling it my ORGun, because it couldn't be more blunt at destroying chemtrails when aimed like a gun. It's also a "blast" to use. As of right now, the parasites keep spraying over the sun but the trails don't plume, because they can't; instead they disintegrate. Please show this imagery to sheeple who believe the contrail nonsense or say this is "water vapor" plane exhaust.

In addition to this new toy, we've been gifting excess towerbusters and earth pipes all over the place since arriving in Sedona in November. Geoengineering efforts are failing rapidly and the HAARP EMF bubble is royally f*cked up. Thank you Orgone energy.

Get ready for the lunar eclipse Sunday. The Parasites are planning to white-out pretty much the entire US (seriously, check your forecast and notice the "cloud cover" or cloudy skies icons set for Sunday. It's everywhere, so all the more reason to make some orgonite, build a chembuster, play with some pyramids, plant some earth pipes, or just put some devices in the car wherever you go. Keep the parasites working overtime!

Happy New Year - More Proof Orgone Energy Stops Geoengineering

1/1/2019

See these photos? In October we spent several days in New Mexico, trying to decide if we would move to Taos or Sedona. We spent much of that time gifting Taos with towerbusters and earth pipes, and specifically gifted the Enchanted Circle, beginning in Taos all the way around to Angel Fire. It took an entire weekend for a 5 hour stretch of turf in the mountains, and included much of the national park. While we were there, despite a drought, it rained for nearly 6 days (I also had those giant chembusters with me).

After a couple months of bathing in those hundreds upon hundreds of Orgone devices, I found out today that Taos is receiving just a “little bit” more snow than usual. Also “little bit” translation = SH*T-TON.

(read more after images)

I don’t want to take sole credit, but the point I’m trying to make is if it looks like a duck, well… you get the point. Orgone energy STOPS geoengineered drought and the suppression efforts used to stop rain and snow and pretty much all precipitation from benefiting and healing this planet.
I moved to the Southwest to fix the rain cycle because drought is not natural and Mother Nature would never kill herself. I’m pleased to see yet another instance of the earth healing itself with Orgone energy, rendering their frequency weapons useless. This is a great first day to 2019!!! And many blessings to the individual skiing in Taos who just shared this update with me!

Celebrate Independence with Orgone Energy!

7/4/2018

I’m making my own fireworks today, which also get a bigger bang for the buck!

Orgone Creativity and a Functional Business Card

6/27/2018

I know you know this already, but “when you make time to focus and put your energy into something you love instead of the programmed matrix of boredom and societal expectations, it is amazing the level of creativity that comes out, and the fun you can have along the way.” -Me, 2018

I thought, what better way to spread Orgone energy knowledge than to put WHAT I DO on a functional device that also DOES exactly WHAT I DO. It’s like the ultimate business card; and any Orgone energy worker knows that busting towers is serious business!

Side note, we had some more rain. Orgone energy stops manufactured drought. Pass it on.

Another Rain Suppression Failure

6/26/2018

Another beautiful day of rain, despite the parasites’ best (and failed) efforts of farming DOR and spraying all night long.

Chicago, and all of Illinois for that matter, are receiving so much rainfall this summer, and everything is growing like weeds. I smile when I think about the government actors and CEOs who are livid pissed that millions of humans haven’t had to water their gardens, lawns, trees, etc. once this summer, even with the manufactured heatwave a couple weeks ago.

Drought is manufactured. Orgone energy stops it. Same with global warming. Pass it on.

I Have Been A Very Busy Boy

6/22/2018

This flooding would never happen if the parasites did not geoengineer this planet to hell and back. EMF/DOR/chemtrails and the haarp network of cell towers, etc. suppress rain everywhere, causing drought, so the government and whatever parasitic entity is above them can usher-in nonsense like Californistan’s water restriction laws (there is no drought in CA, it’s all about control). Now that we’ve gifted thousands of towerbusters and countless Orgone toys (like chembusters and earth pipes) around Chicago and throughout Illinois and the Midwest, their attempts are failing. This heavy rain would balance and spread and never be “heavy” in the first place if they weren’t trying to move it away from dense populations, farmland, and anywhere that it is needed by humanity.

When you use orgonite, the planet will recalibrate, and in the case of this rain, Mother Nature is showing exactly how much rain has been suppressed and trapped in the atmosphere unnaturally. If everyone gifted every last tower on earth, rain would happen everywhere it is needed, only when it is needed, because their building/moving/suppressing efforts wouldn’t work.

Oh, we’re also 20 degrees below average for temp. Why? Because those damn HAARP tower are used to manufacture the fake global warming agenda (FYI, 4th coldest April on record, and the wettest may on record, with June making records now too). I saw a new weather actor today try and push global warming as the reason for this rain. Nope. It’s just water being released from Geoengineering attempts. And you’re going to see more and more and more from now on.

The earth is healing itself. It is not the apocalypse.

Lastly, think of how much water millions of humans are saving by not watering lawns, gardens, etc. Some parasites out there controlling the water utilities are no doubt very pissed today. Makes me smile. Enjoy the rain, because once it’s done, you can expect beautiful sunny skies. If they stopped spraying, you could enjoy it much sooner, but for now, we gift orgonite and do our best to speed it up. Happy Friday!

Pendant Fun

6/19/2018

I was going to wait until July 4th so I could make an “independence and in-to-pendants” joke, but I’m impatient and having too much fun making these!

If you’re interested here are a few (and more types being made today). In order: Lapis lazuli, raw ruby, turquoise, moonstone, green opal, and red garnet. Side note, the colors are a little more vibrant in person (the sun was blinding when photos were taken).

They are 2 x 0.6 X 0.25 inches. Each contains the main crystal listed, along with shiny copper shavings, a small coil, a piece of selenite, and some crushed black tourmaline. The top hook is brass, and the band/cord is organic hemp. Available at my shop, but If you’re interested send me a DM. Also more variations on the way. Cheers!

Drought Propaganda Will Not Work in Illinois

6/16/2018

We’ve been hammered this last week with DOR cloud cover and an extreme (manufactured) heatwave to stop as much rain over Illinois and the Midwest as possible; but alas, the hydrogen bonds be forming, and the giant raindrops be falling. Heatwave is also over. This rain of course follows our WETTEST May on RECORD!

I’ve been busy juggling so much non-Orgone related stuff that I use every minute I can get to make, gift, and share the results of orgonite. These are some of those results.

Drought is manufactured and the parasites strategically keep or move rain away from the places that benefit from it most. One discovery I’ve had is that when rain clouds come near Chicago, they always move east toward the lake (never west from the lake toward us). I believe there is weather modification tech out on the lake that makes this possible. Also, they move as many of the rain clouds out to the lake and then let it burst, which fills the lake, but really benefits no one except the water bottling parasites, and keeps the drought propaganda going.

If you like food, you should like rain (just a reminder). Orgone energy restores the rain cycle. If you’re in Chicago, or really just anywhere in Illinois for that matter, just look around. Everything is well nourished, incredibly green, and plants, trees, bushes, etc., are growing like weeds. Everything is thriving from the excess of rain and the excess of our clear and sunny skies since we introduced orgonite into the environment. So gift some towers, restore life to earth, and pass it on. Happy Tuesday!

Why Does a Small Park Need 175 Celltowers?

6/11/2018

Because shut up and stop asking, that’s why. Now go buy some more crap on Amazon!

If you’re into Orgone energy, Reich, orgonite, or know a little bit about what I do and want to learn more, this video is for you. Thanks for watching!

Ps, YouTube won’t let me change the ridiculous image for the video. I’m also aware my office lighting is schidt. Cheers!

A Little Orgone Fun! Han Solo Trapped in Orgonite

6/10/2018

Looking for a unique Father’s Day gift, or just a unique gift in general? How about Han Solo trapped in Orgonite! Doubles as a conversation piece and as a gigantic Orgone towerbuster to protect from EMF, transmute DOR, and ward off mind control frequencies.

Contains clear casting resin, atomized steel powder, aluminum and copper shavings, gold and silver mica pigments, crushed Quartz, crushed selenite, black tourmaline, and 11 small terminated Quartz points, two of which are wrapped in copper coils (11 because it’s a lucky number). 9.75 x 4.74 x 1.5 inches and just shy of 4 pounds. DM me if interested. Side note, this was actually quite fun to make. Just saying…

Rain Suppression Over Chicago No Longer Works

6/9/2018

Since last weekend when we brought a torrential downpour to the city the parasites have flooded our skies with DOR being created outside of our Orgone barrier and then moved it over the city. Remember, orgonite around cell towers/HAARP renders chemtrails useless, so they have to resort to this method instead. We have so much rain in our forecast, and I think the new water rules in Californistan are the best example I can give when people ask me “why would they want to cause drought?” Simple: Control (there isn’t even a drought in California). They use DOR and chemtrails to suppress rain (among many other things), and then move everything over and away from the area that they want to dry up. I’m pretty sure they wait until it’s far enough out over Lake Michigan to let it burst and rain (the US Gov specifically did this to destabilize Cuba’s sugar crop, so yes, it’s likely happening here too). Regardless, not gonna happen, not for Chicago, not at this point!

Yesterday, we cut off ANOTHER of their sources, while gifting Hammond and Gary Indiana, and found some rather disturbing stuff in the process. I’m kinda beat, as we gifted another small truckload of towerbusters, and it takes a lot of energy to towerbust entire towns, but I plan to share this before the weekend is over (hopefully on video) so that everyone knows what kind of new twisted schidt to look for when they venture out to start busting towers. More to come. Ps it’s raining AGAIN, and hard AGAIN, and I’m sure my friends at ABC 7 are stumbling over their “mostly dry isolated mostly dry dry dry isolated dry” nonsense AGAIN. There is no drought. There never was a drought. There will never be a drought. Orgone energy guarantees it. Pass it on!

Vote for Higher Vibrations Using Orgonite!

6/5/2018

Now why would the parasites be going completely mad today? Oh, it’s voting day! Better try and lower the vibes and mooch off humanity! Don’t support or consent to their system. We’ll be gifting orgonite throughout the day, but there are thousands (yes, thousand with a plural) of towerbusters we’ve put out there around Chicago and the burbs. The chembusters are kicking @$$ and taking names. We have obolixes going to town too. That said, if you read this, take just a moment to attach your positive vibes and send them out into the world of abundant, healthy Orgone energy to overpower the fear and propaganda that is the entire nonsense of voting and “choice.” You do have a choice; shut down the matrix of nonsense. Now everybody look up and wave!!

I Guess Flooding Doesn’t Count as Rain

6/4/2018

I scrubbed the interwebs to try and find at least SOME acknowledgement of the torrential downpour that happened Saturday night after we buried an earth pipe. The forecast prediction for rain on Saturday dwindled to a 10 percent chance throughout the day as DOR rolled in Saturday, with possible scattered showers south of Chicago and an emphasis that it would be light and far south of the city (and no severe weather). It was a monsoon. Double-you tee eff.

I guess they didn’t want to draw attention to how incredibly wrong their geoengineered forecast model was (and is) with all of this Orgone energy restored to the atmosphere. Ps, it’s still beaming blue skies today over Chicago.

TELEPHONE

(312) 574-0198

EMAIL

Mitch@TheOrgoneDonor.com

© Copyright - The Orgone Donor - All Rights Reserved
Website Design by: Sparkly Results